Results 1 to 5 of 5
Threaded View
-
02-04-2018, 08:47 AM #5
- Join Date
- Feb 2018
- Posts
- 11
update. indeed someone else has had this issue i saw that retraction seemed to be the issue. in cura i was able to disable combing mode, i set it to off. then i made sure retraction was enabled. i did nothing with z hop when retracted. the 1st layer looks better with no angled line in it and i'd guess that the infill will not have those lines either.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help