Close



Page 1 of 4 123 ... LastLast
Results 1 to 10 of 34
  1. #1

    NinjaFlex vs. FilaFlex - Any opinions?

    I'm trying to decide which filament to get. I want something that is flexible, and returns to its original position when unflexed. Does anyone know what the differences are between the NinjaFlex and FilaFlex filaments? Is one better than the other? Is one different? Are they based on the same material? Any feedback would be greatly appreciated.

  2. #2
    Super Moderator RobH2's Avatar
    Join Date
    Nov 2013
    Location
    Baltimore, MD
    Posts
    899
    Add RobH2 on Thingiverse
    I am eager to follow this thread. I too am trying to decide. Thanks for starting the discussion.
    Bambu P1S/AMS
    NVision4D http://nvision4d.com

  3. #3
    Staff Engineer Davo's Avatar
    Join Date
    Nov 2013
    Location
    Atlanta, GA
    Posts
    1,085
    Follow Davo On Twitter Add Davo on Facebook Add Davo on Google+ Add Davo on Shapeways Add Davo on Thingiverse
    Don't leave the PlastInk Rubber out of the mix:

    http://www.plastink.com/en/rubber/product/view/2/8.html

    It even seems to come in a clear version:

    http://www.plastink.com/it/prodotti/...view/2/31.html

  4. #4
    Engineer
    Join Date
    Oct 2013
    Location
    new jersey
    Posts
    752
    davo, do you have a place here in the states you are getting the plastink?

  5. #5
    Administrator Eddie's Avatar
    Join Date
    Sep 2013
    Location
    Cape Coral, FL
    Posts
    1,844
    Follow Eddie On Twitter Add Eddie on Facebook Add Eddie on Google+ Add Eddie on Shapeways Add Eddie on Thingiverse
    I got to see the NinjaFlex filament this week at the Inside 3D Printing Conference. I can't compare it to the FilaFlex, as I haven't had the chance to handle it or see it in person yet. However, I really think that the NinjaFlex filament has a good amount of potential. It is very flexible, and holds its shape extraordinarily well. Here are a few photos we took at the NinjaFlex booth this week.



    This was printed using the NinjaFlex Filament

  6. #6
    Staff Engineer Davo's Avatar
    Join Date
    Nov 2013
    Location
    Atlanta, GA
    Posts
    1,085
    Follow Davo On Twitter Add Davo on Facebook Add Davo on Google+ Add Davo on Shapeways Add Davo on Thingiverse
    Quote Originally Posted by jimc View Post
    davo, do you have a place here in the states you are getting the plastink?
    Sorry, I don't recall how we came into possession of the material.

  7. #7
    Student PxT's Avatar
    Join Date
    Apr 2014
    Location
    California
    Posts
    3
    I have FilaFlex for sale on my website but I haven't had a chance to see NinjaFlex in person so I can't really compare the two. How about this, if someone here has access to NinjaFlex or has seen it in person and can write up a comparison I will gladly send a free sample. Otherwise if you have any specific questions about FF I can try to answer them.

  8. #8
    Staff Engineer Davo's Avatar
    Join Date
    Nov 2013
    Location
    Atlanta, GA
    Posts
    1,085
    Follow Davo On Twitter Add Davo on Facebook Add Davo on Google+ Add Davo on Shapeways Add Davo on Thingiverse
    Quote Originally Posted by Davo View Post
    Sorry, I don't recall how we came into possession of the material.
    It turns out the PlastInk folks sent us some samples.

  9. #9
    I can't comment on the FilaFlex filaments, but I can comment on the NinjaFlex. This is definitely a filament that will hold it's shape after being stretched. It is nothing like the flexible PLA filaments that are on the market. The polymer chemistry is completely different.

    Feel free to email me at stankulikowski@fennerdrives.com and I'll answer any questions that I can.

    Stan

  10. #10
    Engineer
    Join Date
    Oct 2013
    Location
    new jersey
    Posts
    752
    biggest problem i have heard with the ninjaflex is getting it to feed. it must be extra soft and rubbery or something. i have used the ecoflex which is the flexible pla. it feeds fantastic but you cant keep it down on the bed which stinks. i am interested to hear some feedback on filaflex or the plastink stuff. i recently had the opportunity to test some very strange material which was a heat meltable silicone. crazy stuff and was just a prototype filament. tricks to get that to feed as well but not impossible. once i got it going i had no issues. there is a fellow member on another forum i am on that has been trying to get ninjaflex to feed for 2 weeks and has still printed nothing. must be really tempermental to the extruder design.

Page 1 of 4 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •