Results 1 to 7 of 7
Threaded View
-
12-10-2017, 02:03 PM #2
- Join Date
- Jul 2017
- Posts
- 193
So, some basic questions.
What extruder and bed temperature are you printing at?
What is your part cooling fan set to, and on what layers?
You say you calibrated your z-axis, how? what height did you rest to?
Any other model print this way?
Did you calibrate your extruder ( i.e. make sure when you tell it to extrude 10mm, it extrudes 10mm )?
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion