Results 1 to 5 of 5
Threaded View
-
12-03-2017, 07:27 PM #5
- Join Date
- Jul 2017
- Posts
- 42
Yeah, it's like if something is too complicated they don't go near the topic.
I've learned a lot since buying my printer but I am sorely lacking in my Gcode knowledge. It's weird that it prints correctly though and, since it does print correctly, I'd be concerned about what I'm deleting if I don't fully understand it.
As an example, my current workaround is to run the print prep as one process, look at which layers I need my temp changes at (let's say layer 23-25 for example), then go back and run the dual extrusion wizard and set the temps according to this. In the new preview (because of all the weird slicing) it might look like the second process starts at layer 58 but if I set the temp changes between layer 23-25 it works correctly. So, at this point, I can't use the "Start/Stop at N height" function and I must slice twice to know which layers to change my extruder temps at.
If anyone is big on Gcode I'd be willing to uploade one of these prints Gcode files.
What a great idea. I will absolutely try this. I have many single layer prints I've designed as my own form of primer and I can do one of those and see what happens.
Thanks guys
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help