Results 1 to 10 of 13
Thread: 3D Printing on a Budget
Threaded View
-
11-18-2017, 09:12 PM #3
- Join Date
- Nov 2017
- Posts
- 17
All are good choices, just make sure its enclosed, and stick to PLA for simplicity. The da Vinci Jr. Pro would be a good choice that falls in the middle. I'm not sure a SLA printer would be best for a school, at least not lower grades. With the FDM printers, just be careful because the hot-end can burn you so keep the door closed.
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion