Results 1 to 4 of 4
-
10-31-2017, 02:56 PM #1
- Join Date
- Oct 2017
- Posts
- 1
DIY - TL- Smoother, the end of "salomon skin effect"
This board was designed to fit on the MicroDelta Rework printer with 4 pin molex connectors.
I maded by hand and it worked
Changing the connector it will work with other printers as well.
Enjoy new quality prints.
Special thanks to RuiRaptor @ youtube.
PT-TL-Smoother.jpg
PT-TL-Smoother-2.jpg
result.jpg
more details on:
https://www.thingiverse.com/thing:2613603
-
11-01-2017, 01:55 AM #2
- Join Date
- Jul 2017
- Posts
- 184
I know this is gonna sound stupid, but I can't be the only one who thinks microstepping artifacts are kind cool, right? Reminds me of wood grain, sort of.
-
11-01-2017, 06:47 AM #3
-
11-01-2017, 01:24 PM #4
- Join Date
- Oct 2016
- Posts
- 184
Seems to be the same mod that I've been looking at but never got around doing: http://www.engineerination.com/2015/...ing-steps.html. Also I don't have that problem described in the link...
Apparently the mod makes the waveforms smoother, thus the individual steps or microsteps aren't so jagged? Kinda like interpolation maybe.
Resin has changed after...
06-18-2024, 10:34 AM in General 3D Printing Discussion