Results 1 to 10 of 14
Threaded View
-
10-15-2017, 11:26 AM #7
- Join Date
- Jul 2017
- Posts
- 193
RC, he is using IdeaMaker as the slicer https://www.raise3d.com/pages/ideamaker
Im also thinking he is having problems on the upper supports, as he says "The tube went fine so far but the mount did fall off the tube!" , but perhaps i'm reading into it.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help