Results 1 to 10 of 10
Thread: Strange slicing in S3D
Threaded View
-
10-06-2017, 10:27 PM #6
- Join Date
- Jul 2017
- Posts
- 193
CA, I used 0.2 layer with 5 top layers, 3 bottom and 40% infill. The attached photo shows that the print has a clear seam, that passes light thru it ( thats how I noticed it). I already printed mine with my first printer ( da Vinci Jr ) and there was no issue. Also, Cura will have no issues.
Effector-S3D.jpg
fred, That's a lottta work to try to get this stl working. Like I said earlier, I just printed it for a life size mode to do some design work. If I need another, I'll just slice in Cura. It sounds like the origin of the issue is the way the part was stitched together, but I do not know how to do it any better.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help