Results 1 to 8 of 8
Threaded View
-
04-02-2014, 06:23 PM #4
- Join Date
- Jan 2014
- Posts
- 462
I don't think you're using too thick a wire, to be honest. I've found another table that recommends 18 AWG for 12V / 6A applications. The only problem I can see with using a thicker wire is making sure you have strain relief at the connection points on the bed.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion