Results 1 to 1 of 1
Thread: What do I need to change?
-
09-27-2017, 07:34 PM #1
- Join Date
- Aug 2017
- Posts
- 45
What do I need to change?
Here is a pic of my latest print,it has a rough texture.What do I need to change.I have an Anet a8 and the settings are layer height .15mm,temp 210 degrees,build plate 60,retraction distance 6.5mm, retraction speed 25mm/s and flow 100 percent.
https ://ibb.co/cdAkr5
Printing time- Is this right?
09-13-2024, 07:51 AM in General 3D Printing Discussion