Results 1 to 3 of 3
Thread: SainSmart 2in1
-
09-13-2017, 09:39 AM #1
- Join Date
- Mar 2014
- Location
- Vienna
- Posts
- 47
SainSmart 2in1 - Help needed!
Hi,
after runing my I3XL printer for quite a time without any issues, I thought it would be good to have a second one.
I try to get the new DIY printer running with the SainSmart 2in1 board, but since I want to have Dual Extruder Setup I´m struggeling with the thermistor ports.
SainSmart 2in1.jpg
They are named wit T0, T1 and T2, as you can see on the Picture.
Thermistor Ports.jpg
The SainSmart wiki says, that T0 would be for the first Extruder, T1 FOR THE BED and then T2 for the 2nd Extruder but I doubt that, because the wiki is really outdated and Marlin 1.1 have had many changes till then.
Does anyone here has some experience with the board and the Thermistors using Marlin latest firmware?
BR, RalfLast edited by ciutateivissa; 09-17-2017 at 11:41 AM. Reason: Poor Response
-
09-13-2017, 01:34 PM #2
well judging by the rest of the board the heatbed would be t2.
-
09-17-2017, 09:06 AM #3
- Join Date
- Mar 2014
- Location
- Vienna
- Posts
- 47
I think the same, but someone here with practical experience?
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help