I did from the 1.1.4 version to 1.1.5. Here's the weird thing. I went back to 1.1.4 again, and did the same thing, the results seem to be better in 1.1.4 than in 1.1.5, however still not leveled, but better after G33 P7. However, I feel like the G29 I did isn't being applied, because i checked the movement of the nozzle before G29 and again after G29 with M420 S1, there is no difference. So I'm at a loss here. Tested using Bilinear haven't had time to try UBL yet.