Results 1 to 10 of 4110
Thread: Qidi Tech 1 - Replicator 1 clone
Threaded View
-
09-05-2017, 05:55 AM #11
- Join Date
- Jun 2016
- Location
- Oklahoma
- Posts
- 904
Also when leveling. Only level with the nozzle to be used directly over each leveling screw. The center of the bed can seem to be a bit higher due to inherent "sag" from the gantry. This is normal on most of these style printers.
1/8" glass is thin enough to bend so if the bed is really bad and the glass is clamped down at the corners it is possible to distort it.
Printer will print perfect...
Yesterday, 10:44 AM in Tips, Tricks and Tech Help