Results 1 to 3 of 3
Thread: ABS raft lift
-
08-30-2017, 03:11 PM #1
- Join Date
- Jul 2017
- Posts
- 7
ABS raft lift
I have a problem that seems to happen with ABS filament.
The raft wants to lift from the platform at the front left-hand side never at any other place. This is a relative position, and does not depend on the absolute position of the extruder. This does not happen when I print with PLA.
Does anyone know of a way to deal with this?
-
08-31-2017, 06:23 AM #2
- Join Date
- Jun 2016
- Location
- Oklahoma
- Posts
- 904
Do you have the part cooling fan running? In general no fan for ABS. What is the bed surface? What temps?
I would also suggest staying away from rafts unless the part has a really small foot print. Using things like corner pucks or brims can help with adhesion.
-
08-31-2017, 07:29 PM #3
- Join Date
- Aug 2015
- Posts
- 256
My recipe for ABS:
110F glass bed
Hairspray
120F build chamber
zero warping problems, the heated chamber is key--when I forget to turn my heater on, large parts warp and pull off the bed.
Printer will print perfect...
Yesterday, 10:44 AM in Tips, Tricks and Tech Help