Results 1 to 4 of 4
Threaded View
-
08-22-2017, 06:50 AM #4
For ABS prints up to 4x4", I use Aqua Net, bed at 85C, head at 230C, 2mm brim. For larger ABS prints, I use an enclosed model with the chamber temperature at 50-55C.
A warm environment is key for larger ABS prints - and other materials also benefit from this, to differing degrees.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help