Results 1 to 10 of 474
Threaded View
-
08-05-2017, 07:11 AM #36
okay this gets even weirder.
scrapped the sequential and used my normal one print profile via usb.
Turns out it's printing the first layer at z=269, then goes down to the bed for the rest of the print. WTF ?????????
Curious to see if the spiral prints anyway. But what the hell is going on.
I changed nothing but start height and first layer speed. Which i do a lot.
Bizarre.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion