Results 1 to 10 of 17
Thread: Warped Prints
Threaded View
-
08-02-2017, 02:58 PM #7
- Join Date
- Jul 2017
- Posts
- 7
TO continue, I repeated the same print with PLA instead of ABS. This is a Hatchback product. Same temps.
This time, about 40 minutes in, the print head began printing about 1 cm above the the half-finished print.
I have absolutely no idea what is going on!
Printer will print perfect...
Today, 10:44 AM in Tips, Tricks and Tech Help