Results 1 to 10 of 26
Thread: intermittent overextrusion
Threaded View
-
07-24-2017, 04:55 PM #11
- Join Date
- Jul 2017
- Posts
- 42
You da man. I really appreciate that. In doing this I've learned quite a bit and I've got this thing printing like a dream but there's something up here that I'm either not understanding or that S3D is computing weird because of the nature of the thin wall section on this.
Let me know what happens.
There's a solid section at the bottom. About 19 layers. The issue creeps up as soon as it passes this section and has just the thin areas to worry about
I've been running ABS out of my left extruder so all these settings are for that. If that is an issue give me a heads up and I can switch it to right extruder and export again. It wouldn't let me upload an x3g file so I zipped the gcode and x3g together
Cart Tray Slide.zipLast edited by Nepherael; 07-24-2017 at 05:05 PM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help