Results 1 to 10 of 20
Hybrid View
-
07-24-2017, 12:42 PM #1
- Join Date
- Jun 2016
- Location
- Oklahoma
- Posts
- 904
While it is printing push the center button or the back arrow, probably doesn't matter what you push. Then look at the menu and scroll. You should see extruder temp and bed temp and some other stuff.
I think it will over ride until the file tells it to do something different but I am not sure.
Test is out and see!
-
07-24-2017, 03:01 PM #2
- Join Date
- Apr 2017
- Posts
- 36
LOL, Wirlybird - "test it out and see". I wish I had that luxury. My deadline is so desperate that if I lose hours of printing through a test I'm screwed. But if I have no choice but to change temps or cancel the print anyway - I'll give it a try.
Thanks to both you and number40fan for the feedback.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion