Results 1 to 10 of 26
Thread: intermittent overextrusion
Threaded View
-
07-24-2017, 06:51 AM #6
on the gcode side of things.
comment out the lines you want to remove and see what happens.
to commen out - just put a ';' at the start of the line and s3d will ignore it.
This way you keep the gcode in case it's needed and just ignore the bits you want to check. :-)
so:
G1 X100 Y-68 F180 ; Wait for ooze
G1 X110 Y-68 F5000 ; Fast wipe
G1 Z1 F100 ; Lift
becomes:
; G1 X100 Y-68 F180 ; Wait for ooze
; G1 X110 Y-68 F5000 ; Fast wipe
; G1 Z1 F100 ; Lift
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help