Results 1 to 3 of 3
Thread: SD card error
-
05-31-2017, 11:44 PM #1
- Join Date
- May 2017
- Posts
- 2
SD card error
I'm in need of some help. I can print test objects. But when I try to print from the SD card, it goes through the motions but no filament comes out to build model.
Please helpLast edited by pjoee; 05-31-2017 at 11:45 PM. Reason: spelling mistake
-
06-04-2017, 05:03 AM #2
try a different sd card.
The ones that come with prinetrs are seriously cheap and cheerful.
Got one with my delta kit, even the fake sticker had fallen off in the bag :-)
-
07-06-2017, 08:24 AM #3
I received a 32Gb SD failed after I had 2Gb+ of data on it, with some testing discovered the SD card was "FAKE".
In fact it was a counterfeit 2gb SD and programmed to look like it had 32gb. Now it is used with a digital Picture Frame with less than 2GB of pictures.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help