Results 1 to 9 of 9
Thread: petg print very brittle
Threaded View
-
06-27-2017, 05:17 PM #8
- Join Date
- Jun 2017
- Posts
- 3
Ok it turned out to be wet filament. Put it in a 90 deg f heater overnight and prints are much better. Printing at 245 and 60 looks pretty good. Just some fine tuning and I should be in good shape. Thanks for all the help.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion