Results 1 to 10 of 18
Thread: n00b to the 3d printing world
Threaded View
-
06-26-2017, 06:46 AM #18
The Extruder will not function unless you are up to printing temperature which for PLA is above 170C.
I had this thought myself. The software will not allow the Extruder stepper to turn unless the Nozzle is hot enough to extrude filament.
Last edited by Roberts_Clif; 07-22-2017 at 12:40 AM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help