Results 1 to 10 of 17
Threaded View
-
06-20-2017, 06:06 PM #11
- Join Date
- Jun 2017
- Posts
- 9
so what if I drilled a opening into the top of the hotend - and inserted a piece of thought on top say 1/2" high will that stop it ya think?
so what if I drilled a opening into the top of the hotend - and inserted a piece of thought on top say 1/2" high will that stop it ya think?
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion