Results 1 to 10 of 17
Threaded View
-
06-20-2017, 04:13 PM #8
- Join Date
- Jun 2017
- Posts
- 9
I will try to get an infocus pic (my camera battery just died)
it is about 3/4" from the extruder to the hotend hopefully you can see
I will try to get an infocus pic (my camera battery just died)
it is about 3/4" from the extruder to the hotend hopefully you can see
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion