Results 1 to 10 of 22
Threaded View
-
06-12-2017, 04:07 PM #5
Ironically, the Davinci's already do this. There's a box that catches the crap that falls from the nozzle, and mounted to that box is a thin metal blade and some sort of foam pad (I'm assuming a high strength, high temp, foam as it's never broken, melted, or deformed). When starting or ending a print, the nozzle brushes against these blades and pads in both the x&y directions, kinda like wiping your feet at a door.
A piece of .020" or .015" aluminum would probably do this very well.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion