Results 1 to 10 of 474
Threaded View
-
06-04-2017, 12:54 PM #11
And then i thought: sod it.
Levelled the bed with a sheet of paper. Set z=0 at the centre of the plate.
And currently printing a small stamp for putting words into clay sling bullets - yes it's a thing lol
Pretty sure the text won't come out as it's thin for a 0,4 nozzle and I'm using a 0.5.
Turned out better than i thought. Anyone know the gcode for Home all ?
M105 it looks like.
Give that a go :-)
Bearing in mind I don't have a print area cooling fan - it's looking pretty good.
Sometimes a little common sense works better than wading through reams of calculations that make no sense :-)
Next job, cooling fan for print area.
***
G28 ;
if anyone is interested. Added that to my end script and works a treat.
So printed a couple small things - now going for a full hour and a half print.
Same print at full speed would be about 2.5 hours on the replicaotr clone.
Curious to see how well this orints at speed.
***
lol she's going like the clappers !
75mm/s at 0.3mm layer height with a 0.5mm nozzle.
With a cooling fan - should be able to do 0.4mm layer at same speed.
Wonder how fast she can actually go.
75 just looks like relaxed cruising speed. :-)
Oh yeah I also ordered some belt tensioners.Last edited by curious aardvark; 06-04-2017 at 01:57 PM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help