Results 1 to 7 of 7
Threaded View
-
05-22-2017, 11:57 PM #5
No! Stay with bugfix_v1.1.0 That has a lot of good stuff that is not in v1.1.0 Please put bugfix_v1.1.0 back on your machine. And do the 'Quick Start' sequence here:
(You can skip the manual probing -- G29 P2 because the G29 P3 is smart enough to handle the unprobed points now.)
https://github.com/MarlinFirmware/Ma...ed_leveling.md
Probably the source of the problem for this:
Followed your guidance here step by step (G29 S1, G29 F10.0 + M500) still it returns "Unified Bed Leveling System v1.01 inactive." for a "G29 W" after a reboot followed by a G28. Is it supposed to be like that?
READ: Error:EEPROM checksum mismatch - (stored CRC)33233 != 64164 (calculated CRC)!READ: echo:Hardcoded Default Settings Loaded Hardcoded Default Settings LoadedLast edited by Roxy; 05-23-2017 at 12:21 AM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help