Results 1 to 10 of 19
Threaded View
-
05-15-2017, 04:28 PM #4
Yeah, that's already a pretty slow printing speed. I agree that a reduced flow will help. Try 80% flow.
Another variable you may factor in is temperature. If your temps are too high your nozzle will tend to over extrude a little. This is exasperated by slow printing speeds.
Maybe try -10C on your printing temps and 80% flow.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)