Results 1 to 10 of 10
Thread: Using Cura for Pegasus printers.
Threaded View
-
05-13-2017, 09:40 PM #4
- Join Date
- Feb 2017
- Posts
- 12
Since I posted that, I've pretty much switched over to Cura 2.5 exclusively for slicing (pronterface for sending G-code) and am pretty happy with the results. For PLA, I'm printing with a 70C bed, 200C hotend, .4 mm nozzle, 2.5mm layer. First layer is .4mm at 50% speed (30mm/s).
Try turning on bed heat. You can just start it via the LCD panel or pronterface before the print or put it in the start G code. Hairspray on 3/16" glass and I've never had a problem with adhesion. Interestingly, the PLA parts pop off when the bed drops to 60C. Before that they are pretty welded to the plate.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help