Results 1 to 4 of 4
-
05-05-2017, 04:51 PM #1
- Join Date
- May 2016
- Posts
- 12
Once G29 finishes, Printer keeps doing G28...then printing ?
Every time I issue a print, I have it set up where it will G28 then extract the auto leveling probe then do a G29. After the G29 finishes, it does another G28 then prints. I have researched my start gcode in repetier and slicer settings and I have taken the G28 out of both yet it still continues to run a G28. I have no idea why. I am running Marlin and I have a mini Kossel.
-
05-05-2017, 07:00 PM #2
- Join Date
- May 2016
- Posts
- 12
I just manually go in and take out the G28. But then I get the issue of the nozzle jams into the bed and tries to start printing??
-
05-05-2017, 08:05 PM #3
Have you looked at the GCode file you are trying to print? Are there extra G28's in that?
-
05-05-2017, 08:56 PM #4
- Join Date
- May 2016
- Posts
- 12
Yes. And then i delete them. Once i delete them, it crashes into the bed. I have been told by a friend to update my marlin as that could be the issue.
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery