Results 1 to 1 of 1
-
05-01-2017, 02:04 PM #1
- Join Date
- Aug 2015
- Posts
- 21
Electroplating a 3D Printed Helmet Replica
So I spent several months experiementing (and frustrating myself :P) with a lot of different processes trying to electroplate 3D prints. I started with graphite, which is cheap and easy for small prints, but takes forever to plate on larger prints. I finally found a few things to use that worked great. There's this stuff called Super Shield Nickel Conductive coating. Its basically spray paint. They make small jars of paint using the same stuff. I used it on some small prints I made of some apple accessories and they came out great!
The helmet was printed on my Flashforge Creator Pro in about 14 pieces and glued together. I sanded the print down, used filler, sanded that, then sprayed it with the nickel and sanded that too to get it smooth. After that I used an electroplating kit to plate with copper and polished it.
Pic below of the results:
Here is a video I made of the process:
https://youtu.be/ilWst2zq-D4
Let me know what you guys think! I'd be happy to answer any and all questions about it.Last edited by Grindeddown; 05-01-2017 at 02:19 PM.
New Here, don't print but need a...
06-20-2024, 12:18 PM in General 3D Printing Discussion