Results 1 to 4 of 4
Thread: Left extruder will not print
-
04-16-2017, 09:44 AM #1
- Join Date
- Apr 2017
- Posts
- 3
Left extruder will not print
Hi,
I have had my printer for a couple of weeks. Yesterday I finally found the Sailfish manual and worked through 5.2 Dual Extruder Calibration.
Now I can print perfectly with the right extruder, but when I print with the left one, everything heats up as normal and then the print head goes to the zero position (bottom right) and stops. Nothing else happens.
I have reset all the settings in Simplify3d and I have done UTILITIES/ RESTORE SETTINGS on the printer. But nothing seems to fix it.
I hope this is not a newbie problem, I did search for a solution but I can not find anything and mainly I do not want to break things even more
Any help appreciated!
G.
-
04-16-2017, 07:01 PM #2
- Join Date
- Apr 2017
- Posts
- 3
Resolved
Resolved - Stupidly I was not using the Sailfish version of ReplicatorG, so the settings were written incorrectly. DOH.
-
04-19-2017, 02:04 PM #3
-
04-20-2017, 08:56 AM #4
- Join Date
- Apr 2017
- Posts
- 3
No, not to slice - just to mess around with firmware settings. I use Simplify3D to slice
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help