Help with printer

[jonnaylin]

I've been having this problem with my printer where at random times, it will move in the X or y axis and return to the print. It only happens when I print from an SD card and the error will occur in different places with the same g code file. I'm running a sain smart 2 in 1 with reprap discount full graphics screen.

https://goo.gl/photos/M8xeLcAggmAT25y18

[LetsPrint3D]

If its only happening when printing with an SD Card, try either using a different SD Card (if you haven't already) or a USB connection if possible. SD Cards, especially those included with many printers are not the greatest quality.

[curious aardvark]

yep try different card and do a diskcheck and low level reformat on the opriginal.

[BoozeKashi]

Unbelievable how many fake SD cards are floating around out there.