Results 1 to 4 of 4
-
02-28-2017, 01:10 PM #1
- Join Date
- Feb 2017
- Location
- Las Vegas
- Posts
- 3
New printer.... Do i need to flasH it???
Hello All
Just got my 1st. 3d printer last night, put it together in about 6 hours. Turned it on ..... nothing moves nor heats up...... double checked wiring.... just wondering if the new mother board needs to be flashes?
here is a link to the printer i got: https://www.3dprintersonlinestore.com/product/personal/creatbot-tech-prusa-i3-kit
open video in new tab to viewLast edited by Wildbill7459; 02-28-2017 at 01:18 PM.
-
03-01-2017, 11:30 PM #2
- Join Date
- Feb 2017
- Location
- Las Vegas
- Posts
- 3
ok got it fixed..... just a loose connection
-
04-01-2017, 03:16 PM #3
- Join Date
- Mar 2017
- Posts
- 7
-
04-02-2017, 04:33 PM #4
I was going to say, usually you have to ask the printer ahead of time if it likes to be flashed, some just aren't into that type of thing.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help