Results 1 to 10 of 110
Thread: Dollo 3D Printable 3D Printer
Threaded View
-
03-25-2017, 09:02 AM #11
- Join Date
- Oct 2016
- Posts
- 184
For the firts time I've actually been just using Dollo, instead of building or tweaking it. I've been printing these containers in hopes that I can get at least some of my stuff organized. In current form, Sollo is working quite nicely: bed leveling works and seems accurate enough. Prints come out without deviations, and even though they do have some artifacts caused by small bumps on X- and Y-axes, they are perfectly usable. There's not much to actually improve; only thing I really need is a part cooling fan for printing PLA. And quality, but it's good enough for the stuff I'm going to use this thing for. I think I'll buy E3D volcano and print large stuff with 0.8mm nozzle or something.
https://www.dropbox.com/s/5i970in1jm...51.42.jpg?dl=0
https://www.dropbox.com/s/3j1dxi3lwl...52.05.jpg?dl=0
https://www.dropbox.com/s/jne9uhhrdt...52.17.jpg?dl=0
Material: different colors of PETG, mostly Esun. Red is 3DJake and clear is Extrudr
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help