Results 1 to 4 of 4
Thread: Trouble slicing large stl file
Threaded View
-
03-21-2017, 02:46 AM #3
- Join Date
- Oct 2015
- Posts
- 35
So if I've got this correct, you've got a 50x50x0.8mm geometry made up of lots of sections of 0.2-0.7mm.
I don't know which technology you are planning to use, but you are going to struggle with most of them at this scale, and if successful it will not be very accuratedetail-1.jpg
As CA said above, what settings are you trying to process this with? It might help us understand whether it's achievable.
Rich
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion