Results 1 to 1 of 1
Thread: Firmware (and a little hardware)
-
02-27-2017, 04:17 AM #1
Firmware (and a little hardware)
Everything is with a prusa i3 (Homemade) and Marlin Firmware
Just wondering what speed I should be running a bowden extruder at. Could i please have the answer with the coding lines and numbers please. If it would help I can post the relevant (what i hope is relevant) sections of my current code.
The hardware issue is just my extrusion is jamming the nozzle and is just creating a big blockage. This I hope can be solved with a firmware fix.
I'm willing to try almost anything at this stage to get it up and running.
Thanks
nooby question,sorry
09-24-2024, 12:06 PM in General 3D Printing Discussion