Results 1 to 10 of 11
Threaded View
-
02-19-2017, 06:14 PM #2
Pics help. It could be a partially broken stepper cable. Is there a clear step where the printing moves to the left? It is good to reroute your X cables to something like this.
xwiring.jpg
This is on a Creator Pro, the purpose is to reduce the amount of flex. The wires are unattached at the top in a few places, then just taped to the side panel.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion