Results 1 to 10 of 12
Threaded View
-
02-16-2017, 06:23 AM #11
For something that size I'd probably use 0.2mm layer height not 0.3.
Also do you have a print area cooling fan ?
Good idea to use one - particularly with very small items.
And what filament are you actually using ?
Extruder Temps would suggest abs while bed temps would suggest pla, although too cool. (should be 60 for pla).
So that's a little confusing. 235 is way too hot for extruding pla and too cool for pet-g and abs. While bed temp is way too cool for abs and petg and slightly too cool for pla.
Also what surface are you printing on ?Last edited by curious aardvark; 02-16-2017 at 06:31 AM.
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion