Results 1 to 10 of 12
Threaded View
-
02-14-2017, 12:59 PM #4
- Join Date
- Feb 2017
- Posts
- 11
Ah i missed that. Ok it looks like your filament has moisture in it and needs a good long drying. Then you'll want to calibrate your extrusion multiplier after drying. Its a combination of moisture and over extrusion. Ive had filaflex filament do the same thing its like printing rubberized foam which is terrible.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion