Results 1 to 10 of 50
Thread: The curse of ABS (Warping)
Threaded View
-
10-20-2013, 01:07 PM #11
Yeah, PLA parts can be very brittle when thin. From my experience you can make thin parts a bit more rigid if you use more perimeters (lets say 5 or more), normally I print with 2 or 3 perimeters.
Though I must say some good quality filament performs very well when dealing with thinner objects.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion