Results 1 to 10 of 15
Thread: Severe Delamination Help
Threaded View
-
02-05-2017, 10:45 AM #5
- Join Date
- Jan 2014
- Location
- Oakland, CA
- Posts
- 935
It might be heat shock. If you're starting with a really cold piece of glass and suddenly warming it unevenly with resistance wire that's embedded in the sub-plate, you could be setting up thermal stresses that the glass can't handle. You might try warming it gently with a heat gun set on low before turning it on.
Andrew Werby
www.computersculpture.com
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help