Close



Results 1 to 10 of 10

Thread: Bad 3D Benchy

  1. #1

    Bad 3D Benchy

    My 3D Benchy test print did not come out great. I have a printrbot simple metal.
    IMG_9613.jpgimageedit_4_8511598572.jpgIMG_9626.jpg
    Do you have any recommendations on how I can make my prints better? Thank you!

  2. #2
    Engineer-in-Training
    Join Date
    Aug 2015
    Posts
    241
    Please post a list of the settings settings you used, and what printer,
    also don't print in transparent materials, you cant clearly see all the defects

  3. #3
    Technologist 3dex ltd's Avatar
    Join Date
    Dec 2015
    Location
    United Kingdom
    Posts
    149
    Follow 3dex ltd On Twitter Add 3dex ltd on Facebook
    As above, please post a link to your slicer setting and that will really help.

    However, a few points:

    It seems that your Benchy is fairly small and this may affect the quality of the model. (try printing bigger if possible)

    Also, your layer height (resolution) seems quite high. I would suggest a layer height of 0.1mm. Or if you want a really detailed model perhaps try 0.05mm layer height.

    I can also see your infill lines showing through. Although this is common and probably not something that is very bad, you can fix this by having a thicker wall (try 0.8mm) or asking your slicer to print the wall before the infill.

    I hope some of these above points help. With a picture of your settings I might be able to be of more help.

    Regards,
    3DEX - Great Filament

  4. #4
    Here are some pictures.
    IMG_9755.jpgIMG_9758.jpgIMG_9760.jpgIMG_9776.jpgIMG_9780.jpg

    I can get screenshots of the slicer settings in a minute.

  5. #5
    Here are the Cura settings.
    Capture.jpgCapture1.jpgCapture2.jpg

    I am using the Printrbot Simple Metal with an X axis upgrade.

  6. #6
    Engineer-in-Training
    Join Date
    Aug 2015
    Posts
    241
    your pics of the Cura settings are too small toe read

    the other pictures looks like the temp is a bit too high, and the has a lot of ringing,you could adjust the jerk settings so the are slower, and try a lower and slower temp

  7. #7
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,801
    Not entirely sure what you are expecting - but those prints are quite good.
    And yep, even i can't read the settings even if I get real close to the monitor :-)

  8. #8
    Engineer-in-Training
    Join Date
    Apr 2015
    Location
    Northern Ohio
    Posts
    198
    Quote Originally Posted by This View Post
    your pics of the Cura settings are too small toe read

    the other pictures looks like the temp is a bit too high, and the has a lot of ringing,you could adjust the jerk settings so the are slower, and try a lower and slower temp
    I agree here it looks like you are running a bit hot. Back it down a bit and repost your setting and we can help you clean those prints up a bit.

  9. #9
    Engineer-in-Training
    Join Date
    Apr 2015
    Location
    Northern Ohio
    Posts
    198
    Quote Originally Posted by curious aardvark View Post
    Not entirely sure what you are expecting - but those prints are quite good.
    shakes head...

  10. #10
    Student
    Join Date
    Feb 2017
    Location
    Birmingham
    Posts
    3
    Add seo-birmingham on Facebook Add seo-birmingham on Google+
    Quote Originally Posted by JasonLavender View Post
    Here are the Cura settings.
    Capture.jpgCapture1.jpgCapture2.jpg

    I am using the Printrbot Simple Metal with an X axis upgrade.
    Thank you!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •