Results 1 to 10 of 4110
Thread: Qidi Tech 1 - Replicator 1 clone
Threaded View
-
01-29-2017, 07:37 PM #11
yep, seems fine. No kapton or blue sheet. You can use those thin silicon pads, but I would still clip. I only use 2 clips so it minimizes interference. Usually back right corner and front left corner. I very rarely use the whole 6x9" build plate so there is always somewhere to put the clips.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion