Results 1 to 10 of 29
Threaded View
-
01-29-2017, 07:59 AM #16
- Join Date
- Apr 2015
- Location
- Northern Ohio
- Posts
- 198
Ah that explains it a little. If it's over extruding back off the multiplier. I am with JK on the retraction shouldn't come into play here but that is a well known issue around dialing in the all metal hotend from what I was able to gather from the other forums. The cooling issue I learned a while back with ABS. some parts with small features like that like about 60% fan on them. Because you are enclosed you can get away with more fan than those with a large makeshift or no enclosure.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion