Results 1 to 10 of 29
Threaded View
-
01-28-2017, 09:34 AM #4
Hmm, interesting. It looks like cooling issues to me. The PLA was ran at a significantly lower temp I assume and probably with forced cooling?
I'd say the ABS needs more time between layers to cool. It is a different plastic all together so it is hard to compare. Usually when something like that happens try printing 2 pieces at once on opposite sides of the build plate. Possibly need to drop the temp of the ABS to 220 or so. Keep build plate at 90c.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help