Results 1 to 2 of 2
-
01-18-2017, 11:36 PM #1
- Join Date
- Jan 2017
- Posts
- 1
Y-Motor Stopped Working - Buzzes and is Locked Up: Prusa i3
I have a Prusa i3 purchased on eBay as a kit. The part I was printing finished successfully, but as soon as it finished, the stepper motor started buzzing very loudly. I tried to home all the axis and the y-axis still wouldn't move and was making the loud buzzing (x,z ok). I turned off the machine, and the motor is completely locked up. I don't see anything external impeding the motor or the belt, it just seized. Any ideas what happened? Not sure why the print was 100% successful and then that happened. This is only my second day using the machine.
-
01-19-2017, 03:17 PM #2
- Join Date
- Apr 2015
- Location
- Northern Ohio
- Posts
- 198
Is it hitting the y stop and not stopping n matter where it is?
Resin has changed after...
06-18-2024, 10:34 AM in General 3D Printing Discussion