Results 1 to 3 of 3
-
03-24-2014, 08:19 PM #1
Measuring RAMPS Board Stepper Motor Voltage
Using the attached image, could someone draw where you would place the multimeter probes to measure the voltage of a stepper motor on a RAMPS board?
board_and_drivers.jpg
Thanks,
Old Man Emu
-
03-25-2014, 04:38 PM #2
- Join Date
- Jan 2014
- Posts
- 462
-
03-25-2014, 07:07 PM #3
Got it. Thanks.
Glad you put in the first link because I found this:
Set VREF to 0.32V on a genuine Pololu or 1.28V on a Stepstick. That gives a current of 0.8A
I have the stepstick and would have used the 0.32V if I hadn't read this.
Old Man EmuLast edited by old man emu; 03-26-2014 at 01:27 AM.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help