Results 1 to 10 of 84
Thread: Looking at Pegasus 12
Threaded View
-
01-17-2017, 09:30 PM #11
- Join Date
- Jul 2014
- Posts
- 305
I had to print the mount for the 8mm nut here is an example: ttp://imgur.com/a/WjSmz . I also printed a mount for a ball bearing to support the top of Acme Threaded rod.
I chose the 8mm Acme Threaded rod due to its common use in 3D printing. Using this and the A4988 driver I also get a nice 400 steps per mm.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help